Vortex blowers BECKER series SV, VARIAIR SV, VASF, etc.

Vortex vacuum pumps (blowers)

Blowers, also known as vortex vacuum pumps, are used for technologies in which a large air flow is required with a relatively small vacuum or pressure drop. The working chamber of the Becker vortex vacuum pump consists of circular hollow rings located in the upper and lower parts of the pump housing and in the running wheel equipped with blades on both sides. The blower can be mounted both horizontally and vertically.

Advantages of vortex blowers:

• Minimal maintenance
• Use of non-lubricated bearings
• Lack of oil - environmental friendliness of the device
• Stable working gas flow with minimal pulsations
• Air-cooled engine (water-cooled models available)

Series and models of single-stage pumps:

Series SV 1.50/3, SV 5 ... /1, SV 8 ... /1-01 with a capacity of 50 - 1225 m3/hour:
SV 1.50/3, SV 5.90/1, SV 8.130/1-01, SV 8.160/1-01, SV 5.490/1, SV 5.690/1, SV 5.1050/1.

SV 130/1 - SV 1100/1 series with a capacity of 130 - 1050 m3/h:
SV 130/1, SV 200/1, SV 201/1, SV 300/1, SV 400/1, SV 500/1, SV 700/1, SV 1100/1.

VARIAIR SV ... /1 series of VARIAIR process control with a capacity of 285 - 1180 m3/h:
SV 130/1, SV 201/1, SV 300/1, SV 400/1, SV 500/1, SV 700/1.

VARIAIR VASF series 1. ... /1 VARIAIR process control with a capacity of 48 - 143 m3/h:
VASF 1.50/1, VASF 1.80/1, VASF 1.120/1.

Series and models of two-stage pumps:

Series SV 5 ... /2, SV 8 ... /2-01 with a capacity of 43 - 375 m3/hour:
SV 5.90/2, SV 8.130/2-01, SV 8.160/2-01, SV 8.400/2-501, SV 5.690/2-500.

SV 130/2 - SV 1100/2 series with a capacity of 70 - 610 m3/h:
SV 130/2, SV 200/2, SV 201/2, SV 300/2, SV 400/2, SV 500/2, SV 700/2, SV 1100/2.

VARIAIR SV ... /2 series of VARIAIR process control with a capacity of 140 - 320 m3/h:
SV 130/2, SV 201/2, SV 300/2, SV 500/2.

VARIAIR VASF series 1. ... /2 VARIAIR process control with a capacity of 24 - 71 m3/h:
VASF 1.50/2, VASF 1.80/2, VASF 1.120/2.